Article: Bold by Design: How to Wear a Tribal Fake Gauge Horn Septum Ring
Bold by Design: How to Wear a Tribal Fake Gauge Horn Septum Ring
Bold enough to look stretched. Designed to fit a standard 16G septum piercing.
The Tribal Fake Gauge Horn Threadless Septum Ring is one of OUFER's most recognizable statement pieces.
Its dramatically tapered horn ends create the visual impact of a much larger gauge, while the actual wearable section remains 16G. This gives you a bold, stretched-style look without permanently stretching your septum.
The upgraded version also features a curved wearable and a threadless pin connection designed for easier insertion and removal.
Because the connection relies on tension, the pin may need a small adjustment before the first wear. A slight curve can improve security, reduce movement, and help the two horn ends sit more evenly.
Here is what makes this fake gauge design different-and how to adjust, insert, and remove it correctly.
P.S. Adjust the pin before wearing the jewelry. Never bend the pin while the ring is inside your piercing.
Why This Fake Gauge Septum Ring Stands Out
A traditional large-gauge septum piece usually requires a stretched piercing. This design creates a similar visual effect in a different way.
The two oversized horn ends taper toward the center, hiding the slimmer wearable section between them. From the front, the jewelry appears much larger than the part that actually passes through your piercing.
You get:
- A bold, stretched-style appearance
- A standard 16G wearable
- Sculptural horn-inspired ends
- A clean threadless connection
- No permanent septum stretching required
The effect is dramatic, but the structure remains intentionally discreet at the center.
What Has Been Upgraded?
The upgraded version replaces the previous straighter wearable with a curved central section.
This curved shape follows the natural path of a septum piercing more closely, making the jewelry easier to guide into place and remove when handled in the correct direction.
The design also uses a threadless pin connection rather than a traditional screw closure.
One horn end contains the receiving channel, while the other has a thin pin. When the pin has a slight curve, it creates tension inside the receiving end and holds the two sides together.
This keeps the connection visually clean, but it also means the pin must be adjusted correctly.
Why Does the Threadless Pin Need to Be Adjusted?
Threadless jewelry is secured by tension.
If the pin is completely straight, it may not create enough tension inside the receiving end. This can cause:
- A loose connection
- Excessive movement
- Uneven horn placement
- One side sitting differently from the other
- The jewelry end separating too easily
A very slight curve in the pin increases tension and helps the two sides stay connected.
The goal is not to create a sharp bend. You only need a subtle, smooth curve.
Watch: How to Adjust and Wear Your Fake Gauge Horn Septum Ring
[Click VIDEO HERE]
This guide demonstrates how to:
- Adjust the threadless pin before wearing
- Test the connection away from your piercing
- Improve tension gradually
- Avoid bending the welded joint
- Insert the curved wearable correctly
- Check the final position
- Remove the ring by following its natural curve
How to Adjust the Threadless Pin Before Wearing
Always adjust and test the pin before putting the jewelry into your septum piercing.
Step 1: Insert the Pin Halfway
Insert the threadless pin about halfway into the receiving end.
Do not push it fully into place yet.
Inserting it halfway supports the pin while giving you enough space to create a controlled curve.
Step 2: Adjust the Middle of the Pin
Hold the receiving end steady.
Gently tilt the horn end to create a very slight curve in the middle of the pin.
Make one small adjustment at a time. The pin should have a subtle, smooth curve—not a sharp angle.
Step 3: Avoid the Connection Point
Do not bend the pin at the point where it connects to the horn end.
This welded joint is not the adjustment area. Bending repeatedly at the base may place unnecessary stress on the connection.
Adjust the middle section of the pin instead.
Step 4: Test the Connection
Align the pin with the receiving end and press it fully into place.
Give the two sides a gentle pull and lightly check whether the horn ends move excessively.
The connection should feel secure without requiring excessive force.
Step 5: Fine-Tune Gradually
If the connection still feels loose, remove the pin and add a little more curve.
Test it again after each adjustment.
If the pin becomes difficult to insert or you feel excessive resistance, stop. Do not force it. Reduce the curve slightly and test the connection again.
The safest approach is:
Adjust a little. Test the fit. Repeat only if needed.
Three Common Problems the Adjustment Can Help Solve
The Horns Look Uneven
If one horn sits higher or at a different angle, remove the jewelry and make a small adjustment to the pin.
Reconnect the two sides and check the alignment again before wearing.
Avoid trying to correct the position by bending the pin while the ring is inside your piercing.
The Jewelry Moves Too Much
Excessive movement usually means the pin is not creating enough tension.
Add a very slight curve to the middle of the pin and test the connection again.
Continue gradually until the ends feel stable and secure.
The Pin Feels Too Tight
If the pin is difficult to press into the receiving end, the curve may be too strong.
Stop instead of forcing the pieces together.
Reduce the curve slightly, realign the pin, and test it again away from your piercing.
How to Insert the Fake Gauge Septum Ring
Once the threadless connection feels secure during testing, separate the two horn ends.
Step 1: Identify the Curve
Look at the natural curve of the wearable section before inserting it.
The jewelry should move through your piercing along this curve rather than in a straight line.
Step 2: Guide the Wearable Through
Insert the curved wearable gently through your fully healed septum piercing.
Follow the existing angle and natural path of the piercing. Do not twist the jewelry against resistance or force it through.
Step 3: Reconnect the Horn End
Once the wearable is in place, align the threadless pin with the receiving end.
Press the two sides together until the pin is fully seated and the connection feels secure.
Step 4: Check the Final Position
Look at the ring from the front.
Check that:
- Both horn ends sit evenly
- The connection feels stable
- The jewelry does not wobble excessively
- The wearable follows the piercing naturally
If the connection still feels loose or the horns look uneven, remove the jewelry before making another adjustment.
How to Remove It Correctly
The upgraded wearable has a natural curve, so it should not be pulled straight out of the piercing.
Step 1: Separate the Threadless Connection
Hold both horn ends securely and pull them apart with controlled, even pressure.
Do not twist or bend the pin sideways.
Step 2: Follow the Natural Curve
Look at the direction of the curved wearable.
Guide the jewelry out by following the same curve and direction used during insertion.
Do not pull the curved section straight through the piercing. Moving against its natural shape may create unnecessary pressure or make removal more difficult.
Step 3: Remove It Slowly
Continue guiding the curved wearable through the piercing until it is completely removed.
If it feels stuck or causes pain, stop. Do not force it.
What Not to Do
To help protect the pin and maintain a secure connection:
- Do not adjust the pin while wearing the jewelry
- Do not bend the pin at the welded base
- Do not create a sharp or dramatic bend
- Do not repeatedly bend the pin back and forth
- Do not force the pin into the receiving end
- Do not pull the curved wearable straight out
- Do not continue if you feel pain or strong resistance
- Do not use this guide on a fresh or healing piercing
Small, gradual adjustments are more effective than one large bend.
A Bold Look Without Permanent Stretching
The New Upgraded Tribal Fake Gauge Horn Threadless Septum Ring is designed for people who want the visual impact of stretched septum jewelry without permanently increasing their piercing size.
Its oversized horn silhouette creates the statement. The standard 16G curved wearable makes the look possible. The threadless pin keeps the structure clean and discreet.
Once you understand how to adjust the pin and follow the natural curve during insertion and removal, the design becomes much easier to handle.
Remember:
Adjust before wearing. Bend the middle- not the base. Test gradually. Follow the curve when removing.
